The kit for load tests with concentrated loads, in its standard configuration, consists of:

• 2 Boost set;
• 1 Pressurizing unit.

Composition of the individual kit:

• 1 Hydraulic cylinder, s/effect, spring return, 10ton capacity, stroke 250mm;
• 2 Aluminium extensions for each size (100cm, 50cm, 25cm, 12.5cm);
• 1 Lower support (reinforced version);
• 1 Top support;

Composition of Pressurizazion Unit:

• 1 Manual Lever pump, max working pressure 700bar (adaptable depending on the number and the type of screw jacks to handle);
• 1 Unidirectional flow control valve with end regulation;
• 1 High-precision digital manometer 0-700 bar;
• 1 Flexible hose High Strength L=5mt;
• 1 Manifold 3 way (1 input / 2 outputs);
• Quick-release couplings screw 3/8 “NPT with protective caps.

NB: The system can be customized and adapted to the test specifications required by the customer.

The kit for load tests with concentrated loads, in its standard composition (2 loading points), is provided as follows:

• No.2 Hydraulic cylinders 10ton, 250mm;
• No. Extension h=100cm;
• No.4 Extension h=50cm;
• No.4 Extension h=25cm;
• No.4 Extensions h=12.5cm;
• No.2 Top support;
• No.2 Lower support;
• No.1 Manual pump with lever;
• No.1 Unidirectional flow control vave with end regulation;
• No.1 Digital manometer 0-700bar;
• No.1 Manifold 3 way (1 input / 2 outputs);
• No.2 Hoses with quick couplings 3/8 “NPT and protective caps.

Possibility of inclusion of load cells with a digital display for analysis, reading and direct recording of the applied force values.

• Technical Sheet EN