• No.1 Single stage lever pump, working pressure 0-700bar, 1.4 cc / pumped, useful tank 0.5 liters (*);
• 1 NVT02B high precision digital pressure gauge 0-700bar with indication of min/max pressure peak, storage of selectable values ​​and measurement units (psi, MPa, kPa, bar, mbar), accuracy 0,20% F.S. (*);
• No.1 Adapter for 1/2″G pressure gauge for connection to a pressure socket;
• No.1 Hollow piston cylinder, spring return, 10ton pushing force, 50mm stroke (**);
  (It is possible to configure the system with jacks of different capacity and stroke)
• No.1 plate Ø 300mm, th. 25mm with adjustable dial gauge support points ;
  (Plates of different diameters and thicknesses are also available on request. Standard dimensions: d.760 mm thickness 25 mm, d.600 mm thickness 25 mm, d.450 mm thickness 25 mm)
• No.1 Articulated head equipped with spherical hinge to center the load;
• No.2 Extensions L=200mm;
• No.1 Extension L=100mm;
• No.2 Extensions L=50mm;
• No.3 Centesimal analog dial indicator 30mm stroke;
• No.3 Dial gauge holders (n.3 L = 600mm + n.3 L = 300mm);
• No.1 Support beam for dial gauge supports L=3000mm composed of two disassemblable blocks L=1500mm each, and equipped with two height-adjustable supports.

(*) Compatible for Flat Jack Kit, STD Pull-Out Kit, Pull-Off 500 Kit, Shove Test;
(**) Compatible for STD Pull-Out Kit, Pull-Off 500 Kit.

The system for plate load tests is supplied with the following standard accessories:

• No.1 Single-stage manual pump with 0,5Lt tank (*)No.1 NVT02B high precision digital pressure gauge 0-700bar with peak pressure indication, complete with calibration report (Accredia ref.) (*)
• No.1 Hollow piston cylinder, spring return, 10 ton (100 kN) pushing force, 50mm stroke complete with force/pressure diagram (**)
• No.1 plate Ø 300mm, 25mm thk;
• No.1 head with spherical hinge to center the load;
• No.2 Extensions L=200mm;
• No.1 Extension L=100mm;
• No.2 Extensions L=50mm;
• No.3 centesimal dial gauges, 30mm stroke;
• No.3 Dial gauge holders;
• No.1 Support beam for dial gauge supports with adjustable supports.

Optional accessories:

• Hollow piston cylinder, spring return, 20 ton (200 kN) pushing force;
• Plate Ø 760mm, 25mm thk;
• Plate Ø 600mm, 25mm thk;
• Plate Ø 450mm, 25mm thk;
• Flight case for protection and transport.

(*) compatible for Flat Jack Kit, STD Pull-Out Kit, 500 Pull-Off Kit, Shove Test
(**) compatible for STD Pull-Out Kit and 500 Pull-Off kit

• Technical sheet EN