• Maximum deepness of the echo-signals visualization (at transversal wave control): 2150 mm;
• Maximum length of the signal realizations, visible on the device’s screen: 1600 μs;
• Maximum measured thickness of concrete (concrete grade 400): 600 mm;
• Minimal diameter of flaw in form of an air cylinder: 30 mm;
• The error of measurements of flaw location thickness and depths: 10 %;
• Time of one measurement processing and writing the result in memory: 10 s;
• The number of single A-scans, that can be written into memory : 200;
• Maximal area of controlled surface (MAP mode): 2 m2;
• Material velocity range: 1 000 – 9 999 m/s;
• Drive-pulse generator amplitude: 20, 100, 200 V;
• Pulse form: Meandr, 0.5÷5.0 periods;
• Pulse frequency: 1 – 50 Hz;
• Receiving bandwidth: 10 – 300 kHz;
• Gain setup range: from 0 to 100 dB, step 1 dB;
• The quantity of the programmable points of DAC function: 32;
• DAC function setup range: 30 dB;
• Power source: Built-in battery;
• Operation time: 14 h;
• Battery charging time: 3 h;
• Operating temperature range: from –20 to +45 °C;
• Display type: TFT (640 х 480);
• Electronic unit size: 260 х 156 х 43 mm;
• Electronic unit weight: 800 g;
• Size of M2502 antenna array: 139 х 105 х 89 mm;
• Weight of M2502 antenna array: 1,1 g.

2D VERSION
Software INTROVIEW
Slice and projection images by grid-scan function (B-Scan, C-Scan, D-Scan, thickness-profile)

3D VERSION
Aoftware INTROVIEW
Available imaging modes: 3D tomographic imaging by grid-scan function, advanced visualization and analysis functionality Slice and projection images by grid-scan function (B-Scan, C-Scan, D-Scan, thickness-profile)

• A1220 MONOLITH – ultrasonic flaw detector;
• Antenna array М2502 0.05A0R100X60PS;
• Double LEMO 00 – LEMO 00 cable 1,2 m;
• USB A – Micro B cable;
• Net adaptor with cable 220V-15V;
• Carrying map-case;
• Soft cover;
• Case.

• Technical Sheet EN