UAV Solutions / Vedi oltre, lontano e con precisione assoluta.
DJI’s first long-range, high-accuracy aerial LiDAR system. 950 m detection range, dual 100 MP cameras, 59-minute flight endurance.
The DJI Matrice 400 + Zenmuse L3 is the benchmark enterprise solution for high-accuracy aerial surveying. 1535 nm LiDAR up to 950 m, dual 100 MP RGB cameras, 59-minute endurance, 100 km²/day coverage.
The integrated DJI Matrice 400 + Zenmuse L3 system is the benchmark solution for high-accuracy aerial topographic surveying. Announced in November 2025, the Zenmuse L3 represents a generational leap over the L2: laser spot reduced to one-fifth the size, range doubled to 950 m, returns per pulse up to 16, and dual cameras upgraded from 20 MP to 100 MP with a combined horizontal FOV of 107° (vs 73.7° for the L2).
The 1535 nm wavelength combined with high per-pulse energy density delivers superior vegetation penetration, enabling accurate reconstruction of complex terrains and structures. Mapping scales of 1:500, 1:1000, and 1:2000 are supported with vertical accuracy of 3 cm at 120 m, 5 cm at 300 m, and 10 cm at 500 m. Microsecond-level time synchronisation ensures perfect coherence between LiDAR, GNSS, and IMU data.
Paired with the DJI Matrice 400, the system achieves 59 minutes of endurance, 6 kg payload capacity, IP55 protection, and dual-technology obstacle sensing (rotating LiDAR + mmWave radar) detecting powerlines at 25 m/s. A single mission at 300 m covers up to 10 km², for 100 km²/day. The DJI ecosystem — Pilot 2, Terra, Modify, FlightHub 2 — delivers DOM, DEM, and coloured point clouds from a single flight.
1535 nm LiDAR reaching up to 950 m at 10% reflectivity (100 kHz) and 2,000 m at 80%. Laser spot 1/5 the size of Zenmuse L2. Frequencies: 100/350/1000/2000 kHz. Up to 16 returns per pulse. 7× cross-cycle calculation. Wire detection up to 300 m.
Dual 4/3″ CMOS sensors with 28 mm equiv. focal length and 107° combined FOV. Resolution 100 MP (12288×8192). Average GSD of 3 cm at 300 m. Mechanical shutter 500,000 cycles. Min. interval 0.5 s (25 MP) or s (100 MP). 4K@30fps video.
System accuracy 3 cm vertical and 4 cm horizontal (RMSE at 120 m). 200 Hz POS system. RTK correction with D-RTK 3: 1.0 cm 1 ppm (H) / 1.5 cm + 1 ppm (V). Attitude error: Yaw 0.02° / Pitch-Roll 0.01°. Point cloud thickness 1.2 cm @1σ.
Up to 16 returns per pulse (5× the L2) at 100/350 kHz modes. 80° FOV. Three scanning modes: Linear, Star-Shaped, and Non-Repetitive. Ideal for forest surveys, timber volume estimation, and sub-canopy terrain mapping beneath dense woodland.
The DJI Matrice 400 achieves 59 minutes of flight time with hot-swappable TB65 batteries. Maximum payload 6 kg. IP55 protection for all-weather operations. Rotating LiDAR mmWave radar obstacle sensing detects high-voltage powerlines at speeds up to 25 m/s.
Flying at 300 m altitude and 15 m/s, a single mission covers up to 10 km². Daily total: 100 km². A decisive step forward over the L2 generation, dramatically reducing acquisition costs for large-area cadastral, infrastructure, forestry, and agricultural surveys.
D-RTK 3 Multifunctional Station
Multi-constellation GNSS reference station for RTK corrections and PPK data up to 15 km baseline. Essential for maximum planimetric and altimetric point cloud accuracy. Formats: DAT/RINEX/RTCM.
Connettore Singolo Gimbal Zenmuse L3
Dedicated DJI SKYPORT mounting adapter for installing the Zenmuse L3 on the Matrice 400. Weight: 145 g. Required for mechanical and electrical connection.
DJI RC Plus 2 Enterprise Edition
Professional controller with 7″ high-brightness display (1000 nit), IP54, extended battery life. Enhanced version with sub-2G SDR module for BVLOS operations (sold separately).
Batterie TB65 Intelligenti (×2)
Hot-swappable batteries for achieving 59 minutes of maximum flight endurance. Multi-charging hub for rapid consecutive field charging cycles.
DJI Terra Licenza Professional
Mission planning, LiDAR processing (LAS/LAZ/PLY/PCD/S3MB), photogrammetric models, point cloud optimisation with DEM/DOM. Mapping scales 1:500, 1:1000, 1:2000.
DJI Modify
Post-processing platform for LiDAR point clouds: automatic classification, volumetric analysis, sections and profiles, professional 3D visualisation. GIS and CAD-compatible output.
DJI FlightHub 2
Cloud fleet management: real-time mission monitoring, route planning, mission and data archive. Also available on-premises (FH2 AIO).
Manifold 3
Onboard AI edge-computing module >100 TOPS for the Matrice 400. In-flight object detection, customisable autonomous missions via PSDK/MSDK, real-time intelligent analysis.
DJI Care Enterprise
Accidental damage coverage, rapid unit replacement, priority technical support. and 2-year plans available separately for Matrice 400 and Zenmuse L3.
Fill out the form with your details and get in touch with us. One of our consultants will be at your disposal to evaluate your needs with you.
Fill out the form with your details specifying what you need in the request type section. Our team is at your disposal to find the best solution to you needs.
Novatest srl
Via Albertini, 36/F8
Gross Ancona
60131 Ancona (AN) - IT
